EV Chargers · Sittingbourne, Kent
EV Charger Installation in Sittingbourne.
NAPIT registered EV charger installation across Sittingbourne and ME9 / ME10. Certified to BS 7671 and backed by our 10-year workmanship warranty.
In short
Do you do EV charger installation in Sittingbourne?
Yes. William's Electrical is a NAPIT registered electrical contractor based in Sittingbourne, and we carry out EV charger installation across Sittingbourne and the ME9 / ME10 postcodes. Home base — usually with you within 15 minutes. Every job is certified to BS 7671 and backed by a 10-year NAPIT workmanship warranty. Call 07825 333341 for a free quote.
EV Charger Installation in Sittingbourne
Most of our Sittingbourne EV work comes off the newer estates — Kemsley, Iwade and the developments off Quinton Road — where driveways are standard and boards are modern enough to take a dedicated circuit straight away. Being based in ME10 means we can survey and install without the travel cost that pushes prices up elsewhere. The older terraces closer to the town centre are the harder conversation: many have no off-street parking at all, and where they do, a rewireable fuse board usually has to be dealt with before a charge point can go on it. We'll tell you which at survey.
Coverage
Sittingbourne& surrounding area
Postcodes ME9 / ME10
Milton Regis · Kemsley · Murston · Borden · Bapchild · Bobbing · Iwade · Newington
Home base — usually with you within 15 minutes. Free site visits and rough quotes by phone — call 07825 333341.
Looking for the full picture? EV Charger Installation across Kent · Electricians in Sittingbourne
What's included in Sittingbourne
- Site survey to confirm your supply can take the charger safely
- Supply and installation of a dedicated, protected EV circuit
- Neat cable routing and a professionally mounted charge point
- Testing, certification and Building Control notification
- Guidance on grants and smart-charging where relevant
How it works
Survey
We check your fuse board, supply capacity and where the charger and car will sit.
Install
We run a dedicated circuit and mount the unit, usually in half a day.
Certify
The install is tested, certified and notified — ready to charge.
“Called Gary at 4am he was at my house for 5am and stopped the leak from doing any further damage and arranged for the repair to be carried out by a plumber. Had him back a few weeks later to find the problem with a socket in my garage that kept tripping. He rewired it all for me and now it works perfect.”
“I phoned him on a Saturday morning. He said could he pop round later and give us a quote. He checked everything and said the job was quite straightforward. The price was very reasonable and Gary said he could fit them there and then. Gary is very knowledgeable, he explained everything and carried out the work cleanly and efficiently. I wouldn't hesitate to recommend Gary.”
“I had a problem with my lights, I had no lights in the house at all. Gary came over to the house and got all the electricity sorted for us in under an hour, so I have no problem recommending him and his company for any electrical issues. He was clean and tidy, good value, friendly and fast.”
“Gary has completed work for me a number of times, including fitting a new kitchen light, repairing a broken plug socket, fitting Hive, fitting alarm/security system and changing light switches to dimmer switches. He always completes work to a high standard.”
EV Chargers in Sittingbourne — common questions
Can I have an EV charger on a Sittingbourne terrace with no driveway?
Unfortunately not in most cases. Running a cable across a public pavement isn't permitted, and gully or channel solutions need the council's approval where they're offered at all. If you have a rear access, a garage block or an allocated bay we can often find a route — worth a call on 07825 333341 to talk through what you've got.
Do I need to upgrade my fuse board first?
It depends what you have. Modern boards on the Kemsley and Iwade estates usually take a charger circuit without any change. An older rewireable board almost always needs replacing first — you can't add a protected dedicated circuit to a board that can't provide the protection. We check at survey and quote both parts together so there's no surprise.
Can any home have an EV charger?
Most can, provided there's off-street parking and the supply has capacity. We confirm this during the survey and advise if any upgrade is needed first.
Are you qualified for EV installs?
Yes — Gary holds the City & Guilds 2919-01 EV charging installation qualification and we certify every install.
Other electrical work we do in Sittingbourne
EV Chargers in other areas we cover
Get a quote for EV charger installation in Sittingbourne.
Or call anytime
07825 333341 WhatsApp usinfo@williamselectricalkent.co.uk
Dyngley Close, Sittingbourne
Kent ME10 2BH
NAPIT registered · BS 7671 compliant · every job backed by a 10-year workmanship warranty.